Electron-beam power supply

The DADIAN EB series of electron beam DC high voltage generators are designed for electron beam generation. Its power conversion circuit adopts a high-frequency power converter with unique intelligent digital control technology. Contains filament power supply, can provide voltage control DC power supply.

Status light
Voltage and current control mode, safety interlock on/off, high voltage start/stop, overcurrent and overvoltage, arc, regulatory failure, overheating, overload (optional)

Input
115Vac/220Vac±10%, 50/60Hz, to be determined in the order
 
Exportation
0 ~ 2kV, Max 100mA

Dc filament
Current: 5A, adjustable
Voltage: 20V (special requirements need to be customized)

Front control panel
The voltage and current can be continuously adjusted by locking the counting potentiometer through 10 turns. Circuit breaker switch and indicator, high voltage on/off and indicator

Voltage regulation
Load: 0.01% of the maximum voltage under full load disturbance
Line: When the input voltage changes ±10%, the maximum voltage is ±0.01%

Current regulation
Load: 0.01% of maximum current at full voltage change
Line: 0.01% of the maximum current when the input voltage is varied within the rated range

Ripple
Maximum output voltage peak value 0.1%

Temperature coefficient
Voltage or current regulation: 100ppm/℃. High stability specifications available

Ambient temperature
Operating temperature: 0℃ ~ 50℃
Storage temperature: -40℃ ~ 85℃

Stability
Voltage and current regulation after half an hour of preheating: 100ppm/ hour

Reveal
3-digit semi-digital voltage and ammeter

Output cable
High voltage BNC cables and connectors certified to international standards

Overall dimension
10 ~ 300W: 48.3 x 48.3 x 4.45cm

Weight
7.7 ~ 14kg