50W X-ray high voltage power supply

DADIAN 50W XMS series is a high precision regulated X-ray high voltage generator with output voltage up to 65kV. The internal intelligent digital control power conversion circuit can provide high efficiency and high pulse current. Contains filament power supply, can provide voltage control DC power supply. This series is available in local and remote Settings, with external security interlock monitoring and fault indicators, short circuit and overload protection.

Input
+24Vdc± 10%, Max 4.25A
 

Output
4 models of positive and negative polarity output
Voltage adjustable from 0 to maximum voltage and current
 
DC filament
Current: 3.5A, adjustable
Voltage: 6V
 

Voltage setting
Machine: Built-in multi-turn potentiometer, can set voltage from 0 to full output
Remote: 0 ~ +10Vdc ratio corresponding to 0 to full output set voltage
Accuracy: ± 1%, input impedance: 10MΩ
 

Current setting
Machine: Built-in multi-turn potentiometer, can set current from 0 to full output
Remote: 0 ~ +10Vdc ratio corresponding to 0 to full output setting current
Accuracy: ± 1%, input impedance: 10MΩ
 

Voltage adjustment rate
Load: 0 load ~ full load, 0.01% of the output voltage
Line: Input voltage change ± In 10% of cases, the maximum voltage is ± 0.01%
 

Current adjustment rate
Load: 0 ~ rated voltage, output current 0.01%
Line: 0.01% of the maximum current when the input voltage is varied within the rated range
 

Function
Standard 85%
 

Ripple
Maximum output voltage peak value 0.1%
 

Voltage and current detection
0 ~ +10Vdc corresponds to 0 to rated output, accuracy: ± 1%
 

Ambient temperature
Operating temperature: -20℃ ~ 40℃
Storage temperature: -40℃ ~ 85℃
 

Voltage temperature coefficient
0.01%/℃
 

Stability (voltage and current)
After preheating for half an hour, 0.01%/ hour; 0.02%/8 hours
 

Dimensions
16× 10× 25.5cm
 

Connectors
Signal: 9-pin D connector
 

High voltage output cable
High voltage cables and connectors certified to international standards
Special requirements need to be stated in the order

XMS Selection table