120W high voltage power supply

DADIAN GHMS series DC high voltage generator output high precision 1kV ~ 70kV stable high voltage. Features universal AC input (85 ~ 265Vac) and power factor correction. The internal intelligent digital control power conversion circuit can provide high efficiency and high pulse current, and the peak capacity is up to 400W. This series offers both local and remote Settings, as well as external safety interlock monitoring and fault indicators, short circuit and overload protection.

Input
85 ~ 265Vac, 47 ~ 63Hz, power factor correction
Power factor (standard) : FL: 0.99
NL: 0.98

Exportation
It can provide a total of 11 models from 1kV to 70kV
Models are available with either positive or negative polarity outputs
 
Voltage regulation
Load: 0 load to full load, 0.01% of the output voltage
Line: When the input voltage changes ±10%, the maximum voltage is ±0.01%

Current regulation
Load: 0 ~ rated voltage, output current 0.01%
Line: 0.01% of the maximum current when the input voltage is varied within the rated range

Efficacy
More than 85%

Ripple
Maximum output voltage peak value 0.1%

Ambient temperature
Operating temperature: -20℃ ~ 40℃
Storage temperature: -40℃ ~ 85℃

Voltage-temperature coefficient
0.01% / ℃

Stability (voltage and current)
After preheating for half an hour, 0.01%/ hour; 0.02%/8 hours

Voltage and current detection
0 ~ +10Vdc corresponds to 0 to rated output, accuracy: ±1%

Overall dimension
1kV ~ 50kV: 9.27×12.7×22.9cm
60,70 kV: 9.27×12.7×27.9cm

Coupler
AC input: IEC320 cable
Signal: 15 pin D connector

High voltage output cable
High voltage cables and connectors certified to international standards
Special requirements need to be stated in the order form

GHMS 

Note: Set "P" to positive polarity and "N" to negative polarity